1. Rope sets of rigging transportation: loading rope rope can be used to rope rope shaft hole or through the social order shaft hole, then rope sets at both ends of the pipe, is strictly prohibited from the high roll directly under, must be used The transitional springboard slowly slide down or hanging under the crane, the ground handling, for the use of pry carry, do not directly pry on the surface of the rope, so as to avoid the surface of the rope crush long-distance transportation needs to cover with tarpaulins to prevent rain infiltration caused by corrosion .
2, wire rope complete sets of sling storage: After the acceptance of new rope storage, should be placed in a ventilated and dry room to prevent direct sunlight and hot air baking; such as must be placed outdoors, should be placed on the ground higher ground, covered with rain cover it is good. Place the floor above the general pad height 300mm.
3, rope rigging Set unwinding: If you need to re-winding winding handle, to avoid rope rope rigging caused by rope ring (kink) phenomenon; unwinding if kink phenomenon, should immediately stop, try to eliminate and then carried out . After the occurrence of kinking phenomenon, according to the degree of kinking of different wire rope will reduce the breaking tension of about 40-60%. Should slowly turn the rope or rolling, slowly reeling the wire rope to prevent the phenomenon of twisting or loose twist.